FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

HA-Fabric Manager user guide 59
To assign a user to an existing group, perform the following procedure:
1. Select SAN > Users from the HAFM menu bar.
The HAFM 8.6 Server Users dialog box opens (Figure 19 on page 52).
2. Select a user in the Users list.
3. Select the groups to which you want to assign the user in the Groups list.
4. Click .
The user is assigned to the selected groups.
5. Click OK.
Determining user groups
An administrator can determine the groups to which a user belongs through the HAFM Users
dialog box.
1. Select SAN > Users from the HAFM menu bar.
The HAFM 8.6 Server Users dialog box opens (Figure 19 on page 52).
2. Select a user in the Users list.
3. Click Find.
The groups to which the user belongs are highlighted in the Groups list.
4. Click OK.
Discovering a SAN
The application discovers products, fabrics, and connections in a SAN. Through discovery, you
can manage and monitor your SAN in real time, ensuring that any issues are resolved
immediately. This section provides instructions for configuring the discovery feature.
Understanding how discovery works
Discovery is the process by which the application contacts the devices in the SAN. The application
illustrates each product and its connections on the Physical Map. After you log in and configure
and turn on discovery, the application discovers products connected to the SAN.
When performing out-of-band discovery, the application connects to the switches through the IP
network, and product information is copied from the SNS database on the switch to the appliance.
Only fabrics that have HP switches as the principal switch are displayed. If a HP switch is being
directly managed, but exists in a fabric where the principal switch is a third-party device, another
appliance is not allowed to connect to and manage that device.
NOTE: Ensure that your SNMP communication parameters are set correctly in order to discover
switches. Otherwise, the discovery may fail.
Configuring discovery
To define the devices you want discovery to find: