FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

Configuring SAN products and fabrics80
Before you display the route between two ports, ensure that:
• All switches or directors in the route are managed by the HAFM application and attached to the
same appliance.
• All switches or directors in the route are attached to the same appliance.
• All switches or directors in the route are Director 2/64, Director 2/140, Edge Switch 2/32,
Edge Switch 2/16, or Edge Switch 2/24 models and are running firmware 1.3 or higher.
• All attached products in the route are in the same zone.
To show the route for two ports:
1. In the Product List, click the plus (+) symbol next to the switch product icon you want to expand.
2. Right-click a node and select Show Route.
The Show Route dialog box appears (Figure 42).
Figure 42 Show Route dialog box
3. Select a destination port from the Destination Port list.
4. Click OK.
The route between the ports appears (Figure 43).
Figure 43 Displaying routes between ports