FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

Configuring SAN products and fabrics84
The Fabric Binding dialog box appears (Figure 47).
Figure 47 Fabric Binding dialog box
2. Select the Enable/Disable check box for the fabric for which you want to configure fabric
binding.
3. Click OK.
Adding and removing switches
With fabric binding enabled, you can add or remove switches from the membership list.
• To add switches to the selected fabric’s membership list, select the switches from the Available
Switches list in the Fabric Binding dialog box, and click to move the switches to the
membership list.
• To add a switch that does not have physical connection to the fabric:
a. Click Add Detached Switch.
b. Enter the appropriate information in the following boxes:
•Domain ID
• Node WWN
c. Click OK.
• To remove switches from the selected fabric’s membership list, select the switches from the
Membership List in the Fabric Binding dialog box. Click to move the switches to the Available
Switches list.
Persisting and unpersisting fabrics
When you persist a fabric, you take a snapshot of the fabric’s products and connections. This serves
as a reference point for future comparisons. You can export the persisted fabric information for
future reference. See ”Exporting data” on page 44.