FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

Monitoring SAN products92
NOTE: When using the View Logs dialog box, you can copy only one row at a time. To copy
multiple rows of data, copy the data from the master log on the HAFM main window.
Using event notifications
You can configure the application to send event notifications to e-mail addresses at certain time
intervals. This is a convenient way to keep track of SAN events. You can also configure products to
“call home” to notify the support center of product problems.
Configuring e-mail notification
To configure e-mail notification:
1. Select Monitor > Event Notification > Email from the HAFM menu bar.
The Event Notification Setup dialog box appears (Figure 57).
Figure 57 Event Notification Setup dialog box
2. Select the Enable Email Event Notification check box.
3. Enter the appropriate information in the following boxes:
• E-mail Server—IP address or name of the SMPT server
• Reply—Recipient’s e-mail address
• Interval—Amount of time between each notification
CAUTION: Specifying a short interval can cause the recipient’s e-mail inbox to fill quickly.
4. Click Test Email to test the e-mail server.
A message appears indicating if the server was found.
5. To specify which users receive e-mail notifications, click User List.
The HAFM 8 Server Users dialog box appears.
6. Select the check box in the Email column for each user you want to receive notification.
7. Click OK.
Notifications are combined into a single e-mail and sent at the specified interval setting. An interval
setting of 0 (zero) causes notifications to be sent immediately.