FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager Release Notes (AA-RUR6F-TE/958-000288-010, August 2005)
Zoning limitations
With firmware 06.00
.00 a nd later, you have the ability to configure large zone sets,
including up to 1024 zones and 1024 end ports in a single zone set. Table 3 shows
the supported limits for the edge switches and directors.
Ta bl e 3 Zoning parameters supported limits
Zoning parameter
Maximum value
Number of zone mem
bers in a zone
2048
Number of zones in a zone set
1024
Number of unique zone mem bers in a zone set
2048
Total number of zo
ne members in a zone set (where a zone
member can be in m
ultiple zones)
4096
Characters per zoning name
32
Number of unique zone members in HAFM Zoning Library
2048
Number of zones in HAFM Z oning Library
1024
Number of zone sets in HAFM Zoning Library
64
Number of end ports
1024
Number of devices supported (including loop devices)
1024
Using the same fi
rmware
All directors a
nd edge switches in the same fabric should have the same firmwar e level
installed—wh
ether 1 Gb ps or 2 Gbps capable, this firmware operates correctly.
The recently released Edge Switch 2/12 had an interim firmware specificfortheEdge
Switch 2/12, 05.05.00-12. This firmware cannot be used for any other edge switch
or director. This interim version is compatible with the M-Series firmware 05 .02.00-13
used for the rest of the M-Series fabric products. The firmware 07.00.00-84 is a common
firmware for a
ll the M-Series fabric products, including the Edge Switch 2/12.
Firmware 06
.02.00-22 provides support for second-generation Edge Switch 2/12 and
Edge Switch
2/24 switches. This is the minimum M-Series firmware supported on the
second-ge
neration Edge Switch 2/12 and Edge Switch 2/24.
HP StorageWorks HA-Fabric Mana g er release notes
19