958-000288-010, August 2005)

Workaround

If the date/time of t

he HAFM appliance needs to be set to an earlier time, p erform

the following:

1. Exit the HAFM application.

2. Select Start > Prog

rams > HP StorageWorks ha-fabric manager 8.6 > Stop

Services.

3. Change the date/tim e on the HAFM ap pliance.

4. Select Start > Programs > HP StorageWorks ha-fabric ma nager 8 .6 > Star t

Services.

5. Restart the HAFM application.

This procedure works even if you previously set the date/time to an earlier time without

using these ste

ps. Rebooting the HAFM appliance will also clear up this problem.

Exiting the HAFM application or rebooting the HAFM appliance has no impact on

the operations of the directors or edge switches and does not c ause a disruption to

fabric operations.

HAFM installation not correctly cancelled by ESC key or Space bar

During the HAFM application installation, the ESC key does not function to cancel the

installation. The Space bar works only once to cancel the installation process.

Workaround

None. If the

installation is not desired, allow the installation to complete and then

uninstall the application.

Performance graphs inaccurate for time period when HAFM appliance is shut

down

If the HA FM appliance has been shut down or the HAFM application and Ser vices have

been stopped, after restarting the performance graphs continue and draw a ﬂat line

from the stop point to the new start point. This indicates a level of performance during

the down time but it is actually unknown. The reporting is inaccurate for that portion

of the graph.

FL Ports do not show destination icon or destination port in per formance graphs

FL Ports do not show destination switch icon or destination port in performance graphs.

This is

because there can be up to 127 devices on a loop port, and they cannot be

displayed in the space in the tables.

HP StorageWorks HA-Fabric Mana g er release notes