FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Using the Fabrics View
101High Availability Fabric Manager User Guide
Figure 48: Fabrics View — Zone Sets tab
Fabric Tree
The scrollable panel on the left side of the Topology and Zone Set tabs contains a
list of fabrics that you can select for display of information or to perform actions
on in the left panel of the Topology and Zoning tabs. The tree displays all fabrics
currently known to the HAFM server. The outermost leaf displays the fabric
name, which initially will be the World Wide Name (WWN) of the fabric’s
principal switch, but if the fabric is “persisted,” it could have a name configured
by the user. The name will be preceded by a fabric status icon if the fabric is a
persisted fabric. (Refer to “Persistent Fabrics” on page 113 for details).
While viewing the Topology tab, click a fabric name or WWN in the Fabric Tree
to display the switches, directors, and ISLs in the fabric in the view area to the
right of the Fabric Tree. If you are viewing the Zone Set tab, click a fabric name
or WWN to display zoning details about the fabric in the view area to the right of
the Fabric Tree.