FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Optional Features
182 High Availability Fabric Manager User Guide
3. Click the check box in the Host Control Prohibited field to display a check
mark and to prohibit the host management program from changing
configuration and connectivity parameters on the switch. In this case, the host
program has read-only access to configuration and connectivity parameters.
Clicking the check box when it contains a check mark removes the check
mark and allows a host program to change configuration and connectivity
parameters on the switch.
4. To activate changes and close the dialog box, click Activate.
5. If you are finished configuring the switch, you can back up the configuration
data.
SANtegrity Features
SANtegrity includes a set of features that enhance security in Storage Area
Networks (SANs) that contain a large and mixed group of fabrics and attached
devices. Through these features you can allow or prohibit switch attachment to
fabrics and device attachment to switches. These features are enabled by
purchasing a feature key, then enabling the key through the Configure Feature
Key dialog box.
SANtegrity Binding features include:
■ Fabric Binding
■ Switch Binding
Enterprise Fabric Mode — Although this is not a keyed feature, the SANtegrity
Fabric Binding and Switch Binding must be installed before you can use the
Enterprise Fabric Mode function through the HAFM Fabrics menu.