FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Information and Error Messages
198 High Availability Fabric Manager User Guide
Are you sure you want to
delete this user?
The selected user will be
deleted from the list of
user definitions.
Click Yes to delete the
user or No to cancel the
operation.
Are you sure you want to
delete this zone?
Requesting confirmation
to delete the specified
zone.
Click Yes to confirm the
deletion of the zone or No
to cancel the operation.
Are you sure you want to
overwrite this zone set?
The selected zone set will
be overwritten in the
zoning library.
Click Yes to overwrite or
No to cancel.
Are you sure you want to
remove all members from
this zone?
All members will be
deleted from the selected
zone.
Click Yes to delete the
members or No to cancel
the operation.
Cannot add a switch to a
zone.
The device that you are
attempting to add to the
zone is a switch, which
cannot be added to a
zone.
Specify the port number
or corresponding World
Wide Name for the
device you want to add to
the zone.
Cannot connect to HAFM
server.
The
HAFM application at
a remote workstation
could not connect to the
HAFM server.
Verify the HAFM server
internet protocol (IP)
address is valid.
Cannot delete product. The selected product
cannot be deleted.
Verify the HAFM
server-to-product link is
up.
If the link is up, the HAFM
server may be busy.
Another Product Manager
instance may be open.
The user may not have
permission to delete the
product.
Cannot disable Fabric
Binding while Enterprise
Fabric Mode is active.
You attempted to disable
Fabric Binding through
the Fabric Binding dialog
box, but Enterprise Fabric
Mode was enabled.
Disable Enterprise Fabric
Mode through the
Enterprise Fabric Mode
dialog box in HAFM
before disabling Fabric
Binding.
Table 9: High Availability Fabric Manager Messages (Continued)
Message Description Action