FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Information and Error Messages
199High Availability Fabric Manager User Guide
Cannot display route on a
one switch fabric.
You cannot show routes
between end devices in a
fabric when configuring
Show Routes (Fabrics
menu).
Error displays when
attempting to show routes
on a fabric with only one
switch. Configure the
Show Route option on a
multiswitch fabric.
Cannot display route. All
switches in route must be
managed by the same
server.
You cannot show the
route between devices
that are attached to
switches or directors
managed by a different
HAFM server.
Make sure devices named
in Show Routes dialog
box are attached to
products managed by this
HAFM server.
Cannot display route. All
switches in route must
support routing.
You cannot show the
route through a fabric that
has switches or directors
which do not support
routing.
The route must contain
only edge switches or
directors that support
routing.
Cannot display route.
Device is not a member of
a zone in the active zone
set.
You cannot show the
route for a device that is
not a member of a zone
in the active zone set. The
source node that you
have selected is not part
of a zone in the active
zone set.
Enable the default zone
or activate the zone for
the device before
attempting to show the
route.
Cannot display route.
Error 9.
An internal error has
occurred while you were
trying to view routes.
Contact the next level of
support to report the
problem.
Cannot display route. No
active zone enabled.
You cannot show the
route through a fabric
with no active zone.
Enable the default zone
or activate a zone set
before attempting to show
the route.
Cannot have spaces in
field.
Spaces are not allowed as
part of the entry for this
field.
Delete spaces from the
field entry.
Cannot modify a zone set
with an invalid name.
Rename zone set and try
again.
A zone set must have a
valid name to be
modified.
Assign a valid name to
the zone set, then you can
modify through the
Modify Zone Set dialog
box.
Table 9: High Availability Fabric Manager Messages (Continued)
Message Description Action