FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Information and Error Messages
208 High Availability Fabric Manager User Guide
Only attached nodes can
be displayed in this
mode.
Users cannot display
unused ports when
adding ports by World
Wide Name.
Change the add criteria
to Add by Port.
Password and
confirmation don’t match.
Entries in the password
field and confirmation
password field do not
match. The entries are
case sensitive and must
be the same.
Enter the password and
confirmation password
again.
Product Manager
instance is currently open.
A product cannot be
deleted while an instance
of the
Product Manager
application is open for the
same product.
Close the
Product
Manager
application,
then delete the product.
Remote session support
has been disabled.
The connection between
the specified remote
workstation and the
HAFM server was
disallowed.
Consult with the
customer’s network
administrator to
determine if the
workstation entry should
be modified at the
Configure Sessions
dialog box.
Remote sessions are not
allowed from this network
address.
Only IP addresses of
remote workstations
specified at the Configure
Sessions
dialog box are
allowed to connect to the
HAFM server.
Consult with the
customer’s network
administrator to
determine if the IP
address is to be
configured for remote
sessions.
Resource is unavailable. The specified operation
cannot be performed
because the product is
unavailable.
Verify the HAFM
server-to-product link is
up. If the link is up, the
HAFM server may be
busy. Try the operation
again later.
Selection is not a World
Wide Name.
The selection made is not
a World Wide Name.
Choose a valid World
Wide Name before
performing this operation.
Table 9: High Availability Fabric Manager Messages (Continued)
Message Description Action