FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Information and Error Messages
213High Availability Fabric Manager User Guide
Zones configured with
port numbers are ignored
in Open Fabric Mode.
While in Open Fabric
mode, zones configured
using port numbers are
enforced through World
Wide Name.
Informational message
only - no action is
required.
Zones must be defined
before creating a zone
set.
You cannot create a zone
set without any zones
defined for the HAFM.
Define zones using the
New Zone dialog box.
Zoning by port number is
not supported in Open
Fabric Mode.
You cannot specify an
item for zoning by port
number if the HAFM is in
Open Fabric Mode.
Either define zones by
WWN of device or
change to Homogeneous
Fabric mode in the
Configure Operation
Mode dialog box of
Product Manager
application.
Zoning name already
exists.
Duplicate zone names are
not allowed in the zoning
library.
Modify (to make it
unique) or delete the
duplicate zone name.
Table 9: High Availability Fabric Manager Messages (Continued)
Message Description Action