FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Introduction and General Information
32 High Availability Fabric Manager User Guide
Note: If user names have not been established, you can use the default user name
(Administrator) and password (password). The user name and password are
case-sensitive. HP recommends that you change the default password as soon as
possible.
To add or modify user names, passwords, and user rights, refer to the
appropriate subsections in the “Users” section on page 65.
Figure 7: High Availability Fabric Manager Login dialog box
3. In the HAFM Server field, type or choose the HAFM server to which you
want to connect. If you are logging in to the local HAFM server, the HAFM
server name is localhost.
The default address that displays in the HAFM Server field is the address of
the last server accessed. Click the HAFM server arrow to see the network
addresses of all HAFM servers that were accessed from the computer you are
logged into.
If you want to connect to an HAFM server that is not listed, enter the server
name or IP address in the HAFM Server field.