FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Using the HAFM Window
55High Availability Fabric Manager User Guide
Fabrics View
To access the Fabrics View, click the Fabrics tab. The Fabrics View displays, as
shown in Figure 25.
Figure 25: Fabrics View
The Fabrics View is divided into two panels. The left panel, the Fabric Tree,
contains an expandable list of fabrics, products in fabrics, and nodes connected to
products. The tree displays all fabrics currently known to the HAFM server.
The right panel is the view area. At the bottom of the view area are two tabs that
change the view of the fabric: the Topology tab and the Zone Set tab.
In the Topology tab view area, right-click a product icon for a menu of options for
the particular product. Right-click a blank part of the view to display a menu of
options for the fabric.
In the Zone Set tab, the currently active zone set for fabrics that you chose in the
Fabric Tree is displayed in the view area.
For a complete description of the Fabrics View, refer to Chapter 5.