FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Using the Menu Bar
78 High Availability Fabric Manager User Guide
3. Select the number of remote management sessions to be allowed from the
Maximum number of remote management sessions list.
4. If you do not want to restrict access to the HAFM, click Allow any network
address to connect and click OK.
5. If you want to restrict access to an address:
a. Click Restrict access to the following network addresses.
b. Click Add. The New Network Address dialog box displays.
c. Enter the IP address of the remote workstation to be authorized in the
Network Address field.
d. Click OK. The New Network Address dialog box closes.
e. Click OK on the Configure Sessions dialog box.
6. If you want to remove the access currently granted to a remote workstation:
a. Click Restrict access to the following network addresses. The IP
addresses display in the Network Address Restrictions area.
b. Select the address to be deleted.
c. Click Remove.
d. Click Yes in the Warning dialog box.
e. Click OK to save the required changes.
SNMP Agent
Choose the SNMP Agent option to open the Configure SNMP dialog box that
allows you to configure the SNMP agent that runs on the HAFM server and
implements the Fibre Alliance MIB.
The HAFM server software contains a simple network management protocol
(SNMP) agent component. The HAFM SNMP agent instruments the objects
defined in the Fibre Channel Management (FCMGMT) Management Information
Base (MIB) Version 2.2 and a small number of objects defined in MIB II.
Through instrumentation of these MIB objects, the agent acts as a translator of
information stored on the HAFM server and attached directors into a form usable
by SNMP management stations such as HP OpenView. Refer to the HP
StorageWorks SNMP Reference Guide for Directors and Edge Switches.
Use these steps to configure the SNMP agent that runs on the HAFM server and
implements the Fibre Alliance MIB.