958-000324-002, March 2005)

• Ship group kit, containing:

•HAFMappliance.

• Ten (10) square alignment washers (required for rack-mounting in H P 9000,

10000 and 11000 series racks).

• HAFM application CD-ROM.

•HAFMboot/restoreCD-ROM.

• Nor ton AntiVirus CD-ROM.

• Modem cable with RJ-11 connectors.

•CD-RW(blank).

•HAFMReleaseNotes.

•10–ft.Ethernetcable.

•PDUpowercord.

• 110–volt AC power c ord.

• Null modem cable.

• Modem phone cable.

• Generic documentation for the HAFM appliance.

• Rack-mount hardware kit, containing:

• Two (2) rear brackets (short) that attach to the cabinet (3.0 inches) .

• Two (2) optional rear brackets (long) that attach to the cabinet (15.25

inches).

• One (1) left slide rail that attaches to the HAFM appliance (19.25 inches).

• One (1) right slide rail that attaches to the HAFM appliance (19.25 inches).

• Two (2) two-hole bar nuts for bolting the front and rear brackets together.

• Four (4) three-hole bar nuts for attaching the brackets to the rack-mounting

standards.

Figure Figure 3 illustrates the front and rear brackets, slide rails, and bar nuts.

HP StorageWorks HA-Fabric Manager Appliance installation guide F W07.00.00/HAFM

SW 08.06.00