958-000324-002, March 2005)

Figure 13 LCD pan el (Input Password)

2. Using the

button to increment a digit, the button to decrement a digit,

the

button to move the cursor left, and the button to move the cursor

right, input the default password (9999) , then press ENTER.TheLAN 1

Setting?? message is displayed at the LCD panel.

3. Press the

button several times until the Change Password? option is

displayed at the LCD panel, then press ENTER. The following message is

displayed (Figure 14):

Figure 14 LCD panel (New Password)

4. Use the arrow keys as described in step 2 to input a new 4 -digit numeric

password, then press ENTER. The following message is displayed (Figure 15):

Figure 15 LCD panel (Save Cha nge)

5. Press ENTER.AWait a moment!! message is displayed at the LCD panel,

the LCD panel returns to the LAN 1 Setting?? message, and the password

changes.

6. Press the up and down arrow keys until Return?? is displayed, then press

ENTER. The LCD panel returns to scrolling mode, which continually displays

HAFM appliance operational information.

Configuring public LAN addresses

NOTE:

Before starting this procedure, ensure that the L AN 1 interface is physically connected

to the L AN. An LCD d isplay of 0.0.0.0 indicates a physical LAN connection is not

present.

Configuration