958-000324-002, March 2005)

Figure 21 LCD panel (Input Password)

2. Using the

button to increm ent a digit, the button to decrement a digit,

the

button to move the cursor left, and the button to move the cursor

right, input the default password (9999), then press ENTER.TheLAN 1

Setting?? message is displayed at the LCD panel.

3. Press ENTER and the following message is displayed (Figure 22)withthe

current L A N 1 IP a ddress. (The default is 192.168.0.1).

Figure 22 LCD panel (LAN 1 IP address)

4. Use the arrow keys a s d escribed in step 2 to input a new IP address, then

press EN TER. The following message is displayed (Figure 23)withthecurrent

subnet mask. (The default subn et mask is 255.0.0.0) .

Figure 23 LCD panel (Input Netmask)

5. Use the arrow keys as described in step 2 to input a new subnet mask, then

press ENTER. The following message is displayed (Figure 24)withanIP

address whose first three octets (each three decimal digits) are the same as the

IP address entered in step 5, and the last octet is set to decimal 254 (or the

default gateway IP address of 0.0.0.0 is displayed ).

Figure 24 LCD panel (Input Gateway)

6. Use the arrow keys as described in step 2 to input a new gateway I P address,

then press ENTER. The following message is displayed (Figure 25)withthe

default DNS server IP address of 0.0.0.0.

HP StorageWorks HA-Fabric Manager Appliance installation guide F W07.00.00/HAFM

SW 08.06.00