958-000324-002, March 2005)

Figure 37 LCD panel (S ave C han g e)

9. Use the up and down arrow keys as described in step 2 to select YES,then

press ENTER.Ifyousavedthechanges,aWait a moment!! message

is displayed at the LC D panel and the LCD panel returns to the LAN 1

Setting?? message.

10. Press the up and down arrow keys until Return?? is displaye d, then press

ENTER. The LCD panel returns to scrolling mode, which continually displays

HAFM appliance operational information.

11. Record the private L A N IP address and subnet mask for reference if the H AFM

appliance hard drive fails and must be restored.

Configuring additional HAFM appliance information

Configure a computer name and workgroup name for the HAFM appliance. If required,

change the HAFM appliance’s gateway addresses and domain name system (DNS)

HAFM appliance IP a ddresses to conform to the customer’s L AN addressing scheme.

The gateway addresses are the addresses of the local router for the corporate intranet.

Configure these parameters from the HAFM appliance’s Windows 2000 operating

system, using a LAN- attached PC with standard web browser.

Accessing the HA FM appliance desktop

To login and access the HAFM appliance desktop:

1. Ensure the HAFM appliance and a browser-capable PC a re connected

through an Ethernet LAN segment. At the PC, launch the browser application

(NetscapeNavigatororInternetExplorer).

2. At the PC browser, enter the IP a ddress of the HAFM appliance for the L A N

to which the PC is connected (LAN 1 or L AN 2), followed by :5800, as the

Internet uniform resource locator (URL). Enter the URL in the following format:

http://xxx.xxx.xxx.xxx:5800

Where xxx.xxx.xxx.xxx is the default IP address or the IP address configured

while performing Configuring appliance password and network addresses.

The VNC Authentication screen is d isplayed (Figure 38).

Configuration