958-000324-002, March 2005)

11. Record the changed gateway and DNS ser ver addresses for reference if the

HAFM appliance hard drive fails and must be restored.

12. To configure addresses for the public LAN connection (LAN 1), double-click

the Local Area Connection 1 icon and repeat step 4 through step 10 of this

procedure.

13. Click close (X) at the upper right corner of the Network and Dial-up Connections

window to return to the Windows 20 00 desk top.

14. Reboot the HAFM appliance:

a. Click Start > S h u t Down at the Windows 2000 desktop. The Shut

Down Windows dialog box is displayed.

b. Select the Restart option the Shut Down Windows dialog box, and then

click OK to reboot the HAFM appliance.

c. To log into HAFM, see Figure 46.

Logging into HAFM

You must log into a HAFM appliance to monitor a SAN. Perform the following:

NOTE:

You must have an established login and password account on the appliance in order

to log in.

1. The HAFM Log In dialog box displays automatically when you open the application

(see Fig

ure 46

HP StorageWorks HA-Fabric Manager Appliance installation guide F W07.00.00/HAFM

SW 08.06.00