958-000324-002, March 2005)

Figure 54 Date/Time Properties dialog box (Time Zone tab)

4. Tochangethetimezone:

a. Sele ct the appropriate time zone from the drop-down list at the top of

the dialog box.

b. If instructed by the customer’s system administrator, select the

Autom atically adjust clock for daylight saving changes check

box.

c. Click Apply. Record time zone and daylight savings information for

reference if the HAFM appliance hard drive fails and must be restored.

5. Click the D ate & Time tab. The Date/Time Properties dialog box is displayed

with the Date & Time page open.

6. To change the date and time:

a. Sele ct the month from the drop-down list.

b. Click the up or down arrow adjacent to the year field and select the

desired year.

c. Click the day on the calendar to select the desired date.

Configuration