958-000324-002, March 2005)

Figure 57 Call Home Event Notiﬁcation Setup di alog

box

3. Place a check mark in the Enable C all Home Event Notiﬁcation option.

This enables the call home function for the HAFM appliance, as well as for

all Directors and Edge Switches that have also been enabled for call home

notification.

Configuring identification information for directors and edge switches

This procedure describes how to configure identification information for each Director

and Edge Switch that is ma naged by the HAFM appliance.

Repeat this procedure for each Director or Edge Switch you want to configure for call

home event notification

NOTE:

In order for Directors and Edge Switches to be ma naged by the HAFM appliance,

you must first add them using the HAFM application. Refer to the

HP StorageWorks

HA-Fabric Manager User Guide

for m ore information.

Complete the following steps for each Director or Edge Switch m a nag ed using HAFM:

1. From the HAFM m ain window, double-click on the icon for the device. The

Hardware View for the device is displayed.

2. On the menu bar, click Conﬁgure > Identiﬁcation. The Configure

Identification dialog box is displayed (Figure 58).

HP StorageWorks HA-Fabric Manager Appliance installation guide F W07.00.00/HAFM

SW 08.06.00