OS SNMP Support Manual (620-000131-620, April 2005)

Fibre Alliance MIB

2-107

McDATA SNMP Support

FcConnUnitRevsRevision

Type SnmpAdminString

Product Mapping XX.XX.XX (The revision of the switch).

Access R

Description A vendor-specific value identifying a revision of a component of the

connectivity unit.

FcConnUnitRevsDescription

Type SnmpAdminString

Product Mapping Switch Firmware Level

Access R

Description Description of a component in the fcConnUnit to which the revision

corresponds.

Sensor Table The sensor table lists the sensors(for fan and power supplies)

supported by each switch. For each switch, the table will contain a list

of all fan and power supply FRU positions, regardless of whether

they are installed or not. When a FRU is not installed, the

UnitSensorStatus for that table entry will be unknown(1). When a

power supply or fan FRU is installed or removed, a sensor trap will

be sent (if enabled) which contains an index to the appropriate entry

in this table, for the affected FRU.

Note that the number of entries in the table does not change when a

fan/power supply FRU is installed or removed.

*fcConnUnitSensorIndex

Type Unsigned32

Product Mapping Not assessable.

Access R

Description A unique value among all fcConnUnitSensorEntrys with the same

value of

fcConnUnitId, in the range between 1 and

fcConnUnitNumSensors[fcConnUnitId].