OS SNMP Support Manual (620-000131-620, April 2005)

Fibre Alliance MIB

2-109

McDATA SNMP Support

Description This describes the status of the sensor as a message. It may also

provide more resolution on the sensor indication, for example ‘Cover

temperature 1503K, above nominal operating range’.

FcConnUnitSensorType

Type INTEGER

Product Mapping fan (4) or power-supply (5)

Access R

Description The type of component being monitored by this sensor. The

unknown (1) and other (2) values meanings analogous to those for

the

fcConnUnitSensorStatus object; all other values are essentially

self-explanatory.

The values are defined as unknown (1), other (2), battery (3), fan (4),

powerSupply (5), transmitter (6), enclosure (7), board (8), and

receiver (9).

FcConnUnitSensorCharacteristic

Type INTEGER

Product Mapping Not supported. Always other (2).

Access R

Description The characteristics being monitored by this sensor. The unknown (1)

and other (2) values meanings analogous to those for the

fcConnUnitSensorStatus object; emf (5) refers to electro-magnetic

field; all other values are essentially self-explanatory. The values are

defined as unknown (1), other (2), temperature (3), pressure (4), emf

(5), currentValue (6), airflow (7), frequency (8), and power (9).

The Port Table Generic information on ports for a specific fcConnUnit.

fcConnUnitPortIndex

Type Unsigned32

Product Mapping The port index.