OS SNMP Support Manual (620-000131-620, April 2005)

Connectivity unit group

B-5

FC Management MIB

The following are the defined keywords that will be recognized and

replaced with data during a launch.

If write is not supported, then return invalid. This value will be

retained across boots.

DEFVAL { "" }

Sequence

::= { connSet 2 }

statusChangeTime

Syntax TimeTicks

Access read-only

Status obsolete

Description The sysuptime timestamp in centiseconds at which the last status

change occurred for any members of the set.

Sequence

::= { connSet 3 }

configurationChangeTime

Syntax TimeTicks

Access read-only

Status obsolete

Description The sysuptime timestamp in centiseconds at which the last

configuration change occurred for any members of the set. This

represents a union of change information for

connUnitConfigurationChangeTime.

Sequence

::= { connSet 4 }

connUnitTableChangeTime

Syntax TimeTicks

Access read-only

USER replace with username

PASSWORD replace with password

GLOBALID replace with globalid

SERIALNO replace with serial number