OS SNMP Support Manual (620-000131-620, April 2005)

B-56

E/OS SNMP Support Manual

FC Management MIB

Description Count of times that FBSY was returned to this port as a result of a

frame that could not be delivered to the other end of the link. This

occurs if either the Fabric or the destination port is temporarily busy.

Port can only occur on SOFc1 frames (the frames that establish a

connection). Note, this is a Fibre Channel only stat. This is the sum of

all classes. If you cannot keep the by class counters, then keep the

sum counters.

Sequence

::= { connUnitPortStatEntry 10 }

connUnitPortStatCountPBSYFrames

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of times that PBSY was returned to this port as a result of a

frame that could not be delivered to the other end of the link. This

occurs if the destination port is temporarily busy. PBSY can only

occur on SOFc1 frames (the frames that establish a connection). Note,

this is a Fibre Channel only stat.This is the sum of all classes. If you

cannot keep the by class counters, then keep the sum counters.

Sequence

::= { connUnitPortStatEntry 11 }

connUnitPortStatCountFRJTFrames

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of times that FRJT was returned to this port as a result of a

Frame that was rejected by the fabric. Note, This is the total for all

classes and is a Fibre Channel only stat.

Sequence

::= { connUnitPortStatEntry 12 }

connUnitPortStatCountPRJTFrames

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory