HP StorageWorks HA-Fabric Manager Release Notes, V08.08.00 (AA-RUR6H-TE, December 2005)

Impor t ant informa tion
This section de
scribes important information related to the HAFM software, the Edge
Switch 2/24, E
dge Switch 2/32, Director 2/64, Director 2/140, and McDATA 4Gb
SAN Switch.
Features not supported in this release
The following HAFM features are not suppor ted in this release:
• SANtegrity Security Center
• Group Configuration Manager
These features are described in the documentation released with HAFM 08.08.00 and
firmware08.01.00.Someofthesefeaturesmaybeavailableinafuturerelease.
Adding McD
ATA 4Gb SAN Switch to HAFM management
A McDATA 4Gb SAN Switch is added to HAFM mana gement the same way as other
M-Series switches, with one additional configuration requirement. The username and
passwordfortheAdministratoraccountoftheswitchmustbeconfigured in HAFM. The
default username and password for a McDATA 4Gb SAN Switch are preconfigured for
the switch in HAFM when the switch is added to H AFM management. If the switch
username and p assword have not been changed from the default settings, no change is
required. The default user name is admin, and the d efault password is password.
To configuretheusernameandpasswordthoughHAFM:
1. Selec
t Discover > S etup .
The Discover Setup dialog box is displayed.
2. Clic
k Add.
The Address Properties dialog box is d isplayed.
3. Enter the description, IP address, and subnet m ask in the appropriate boxes.
4. Sel
ecttheProductTypeandAccesstab.
The Address Properties dialog box with Product Type and
Access tab is display ed.
5. En
ter the switch user ID and password for the Administrator account.
6. Click OK.
Disabling the SNMP Proxy
SNMP Proxy is enabled by default on all McDATA 4Gb SAN Switches. To ensure p roper
functionalityofHAFM,theSNMPProxyfeaturemustbedisabledpriortodiscovering
theMcDATA4GbSANSwitchinHAFM.
4