FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

3
3-94
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Diagnostics
a. At the Hardware View, click the port graphic. The Port Properties
dialog box displays.
b. Inspect the Operational State field.
Figure 3-44 Port Properties Dialog Box
NOTE: If the Open Trunking feature is installed and additional item will
appear in the Port Properties dialog box, called Congested Threshold %. This
field displays the active congested threshold percentage currently configured
in the Configure Open Trunking dialog box.
Does the Operational State field indicate Segmented E_Port?
YES NO
↓ Analysis for a port failure or other link incident is not
described in this MAP. Go to MAP 0600: Port Failure and Link
Incident Analysis on page 3-72.
6
Inspect the Reason field fir the selected port at the Port Properties
dialog box.
Is the Reason Field blank or does it display an N/A message?
NO Yes
↓ The switch ISL appears to be operational. Exit MAP.