FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

Manage Configuration Data

4-57

Repair Information

• Simple network management protocol (SNMP) configuration

information, including trap recipients, community names, and

write authorizations.

• Zoning configuration information, including the active zone set

and default zone state.

NOTE: The switch must be set offline prior to restoring or resetting the

configuration file.

Back Up the

Configuration

NOTE: The figures in the following procedures are examples. The product

names shown in the figures may not be the same as the product names you

see on your screen. The product names on your screen are correct.

To back up the switch configuration file to the EFC Server:

1. At the EFC Server, open the EFC Manager application. The

Product View displays.

2. Select the icon representing the switch for which a configuration

file is to be backed up. The Hardware View for the selected switch

displays.

3. At the navigation control panel, select Backup & Restore

Configuration from the Maintenance menu. The Backup and Restore

Configuration dialog box displays.

4. Click Backup. When the backup process finishes, the Backup

Complete dialog box displays.

5. Click OK to close the dialog box and return to the Hardware View.