ClusterPack Tutorial

Back to Top
Step Q7 Configure the ProCurve Switch
z
Select an IP address from the same IP subnet that will be used for the
Compute Nodes.
z
Connect a console to the switch
z
Log onto the switch through the console
z
Type 'set-up'
z
Select IP Config and select the "manual" option
z
Select the IP address field and enter the IP address to be used for the
switch
For more information, see the Comprehensive Instructions for this step.
References:
z
Step 7 Configure the ProCurve Switch
Back to Top
Step Q8 Copy the License Files to the Management Server
Put the files in any convenient directory on the Management Server.
For more information, see the Comprehensive Instructions for this step.
References:
z
Step 8 Copy the License Files to the Management Server
Back to Top
Step Q9 Install ClusterPack on the Management Server
z
Mount and register the ClusterPack DVD as a software depot.
z
Install the ClusterPack Manager software (CPACK-MGR) using
swinstall.
z
Leave the DVD in the DVD drive for the next step.