Compaq StorageWorks UltraSCSI RAID Enclosure (DS-BA370 Series) User's Guide (EK-BA370-UG. C02, September 1998)

Power Verification and Addressing
4–14 UltraSCSI RAID Enclosure
5. Note the enclosure address setting (0, 2, or 3) on the PVA SCSI ID
switch (C
ALLOUT
3).
6. Pull both extractor latches outward and remove the PVA.
Table 4–7 Installing a PVA
1. Verify that the PVA being installed is a model DS–BA35X–EC.
2. Align the PVA (C
ALLOUT
2) with the
top,
right
-hand slot and insert it.
Table 4–6 Removing a PVA (Continued)
CXO5821A
1
2
3
CXO-5737A
CXO5754B
2