HP Comware 5 Debug Manual Vol 1

ATM debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging atm all
Use debugging atm all to enable all types of ATM debugging.
Use undo debugging atm all to disable all types of ATM debugging.
Syntax
debugging atm all
undo debugging atm all
Default
All types of ATM debugging are disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
When all types of ATM debugging are enabled, a large amount of output information is generated. ATM
debugging may also disable users from managing network devices through terminals and may decrease
the packet forwarding performance considerably.
Besides outputting debugging information such as ATM errors, OAM, events, and packets, this
command also displays information exchanged between upper-layer software and hardware interfaces
(for example, PVC parameters information sent to the hardware when a PVC is created). Run this
command if you need to view the information exchanged through drive interfaces between platform
software and bottom-level hardware.
Related commands
•
debugging atm error
•
debugging atm oam
•
debugging atm event
•
debugging atm packet
debugging atm error
Use debugging atm error to enable debugging for ATM errors.
Use undo debugging atm error to disable debugging for ATM errors.
Syntax
debugging atm error [ interface interface-type interface-number [ pvc { pvc-name | vpi/vci } ] ]
105