HP Comware 5 Debug Manual Vol 1

undo debugging atm error [ interface interface-type interface-number [ pvc { pvc-name | vpi/vci } ] ]
Default
Debugging for ATM errors is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
pvc-name: PVC name, a string of 1 to 16 characters. A PVC name is unique on an ATM interface and is
not case-sensitive. It cannot be a valid VPI/VCI pair (such as 1/20).
vpi/vci: ATM virtual path identifier (VPI) and ATM virtual channel identifier (VCI). The vpi argument
ranges from 0 to 255. The range of the vci argument varies with interface types, as listed in Table 47.
Normally, VCI 0 through VCI 31 are reserved for special purposes.
Table 47 Interface type and VCI range
Interface type VCI range
ADSL 2+ 0 to 255
G.SHDSL 0 to 255
ATM OC3 0 to 1023
ATM E1 0 to 511
ATM T1 0 to 511
ATM E3 0 to 1023
ATM T3 0 to 1023
Usage guidelines
If no interface is specified, the operation is performed on all interfaces.
If you do not specify the PVC name or VPI/VCI pair, the operation applies to all PVCs.
Table 48 describes output fields and messages for the debugging atm error command.
Table 48 Output from the debugging atm error command
Field
Description
interface name Interface name.
pvc VPI/VCI VPI/VCI pair.
error code Error description and error code.
Examples
# Enable all types of debugging for ATM errors on all ATM interfaces on Router B. Output similar to the
following example is generated when the following conditions exist:
•
Router A and Router B are connected through their ATM interfaces.
106