HP Comware 5 Debug Manual Vol 1

Field
Description
Recv:Broadcast Kickoff PreUser IPC Request.
802.1X received a broadcast to log off logged-in
users.
DOT1XSOP: Vlan HashTable Created.[port and auth
index is nonsense.]
The SOP module created a VLAN authorization hash
table.
DOT1XSOP: Vlan HashTable Deleted.[port and auth
index is nonsense.]
The SOP module deleted the VLAN authorization hash
table.
Notify DOT1X of vlan UnAsgn success
The device sent a message to notify 802.1X that a
VLAN was removed successfully.
GuestVLAN ASGN/UNASGN SUCCEED!
802.1X assigned a guest VLAN to or removed it from
a port successfully.
Authoring authored Vlan... 802.1X is authorizing an unauthorized VLAN.
Unauthoring authored Vlan... 802.1X is unauthorizing an authorized VLAN.
Author operation finished! VLAN authorization completed.
Unauthor operation finished! VLAN unauthorization completed.
Author info is INVALID, need not unauthor operation.
Authorization information is invalid. Do not need
unauthorization.
BroadcastKickoffPreUser IPC Request
802.1X broadcast IPC request to log off duplicated
802.1X users.
Receive reset drv msg 802.1X received a message to reset the driver.
Receive clear drv msg 802.1X received a message to clear the driver.
Clear 802.1X drv . 802.1X driver was cleared.
Set 802.1X function to driver. 802.1X driver was reset.
Waiting 802.1X users off-line. 802.1X is waiting for 802.1X users to go offline.
Slot Insert, PortSec Enabled, set flag in portnum!
A card was inserted in the slot, and port security was
enabled. 802.1X set a flag for ports to be controlled
by port security on the card.
Rxed EAPOL packet. The port is unavailable.
The port received an EAPOL frame. The port is
unavailable.
Rxed EAPOL packet. 802.1X is not enabled on this
port.
The port received an EAPOL frame. 802.1X is not
enabled on the port.
Rxed EAPOL packet. Force mode enabled on this port.
The port received an EAPOL frame. The port is in
force-authorize state or non-authorize state. It does not
process frames.
Portsec PreHandle 1X req!!!
The port security module preprocessed the 802.1X
authentication trigger packets.
Failed to alloc resource. 802.1X failed to allocate resources.
Alloc or search resource successfully. 802.1X allocated or queried resources successfully.
Send Msg EAPOL-START to 802.1X-Msg-Queue
successfully.
A port sent an EAPOL-START message successfully to
the 802.1X message queue.
Send Msg EAPOL-LOGOFF to 802.1X-Msg-Queue
successfully.
A port sent an EAPOL-LOGOFF message successfully
to the 802.1X message queue.
10