HP Comware 5 Debug Manual Vol 1

Usage guidelines
Table 59 describes output fields and messages for the debugging rm backup command.
Table 59 Output from the debugging rm backup command
Field
Description
Module XXX Module name.
backup data(XXX) Backup data size in bytes.
routine backup Scheduled backup.
realtime backup Realtime backup.
batch backup Batch backup.
Examples
# Enable RM data backup debugging. When you configure an IPv4 static route, output similar to the
following example is generated:
<Sysname> debugging rm backup
*Jan 9 16:52:03:500 2010 Sysname RM/3/RMDEBUG:
RM Backup: Receive HA routine backup notification
<Sysname> system-view
[Sysname] ip route-static 1.1.1.1 32 null 0
*Jan 9 16:52:05:875 2010 Sysname RM/3/RMDEBUG:
RM Backup: Module USR sends backup data(284) to SMB.
*Jan 9 16:52:05:875 2010 Sysname RM/3/RMDEBUG:
RM Backup: RM send realtime backup data success.
// RM sent the static route backup data.
debugging rm bfd
Use debugging rm bfd to enable RM BFD debugging.
Use undo debugging rm bfd to disable RM BFD debugging.
Syntax
debugging rm bfd
undo debugging rm bfd
Default
RM BFD debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 60 describes output fields and messages for the debugging rm bfd command.
120