HP Comware 5 Debug Manual Vol 1

Syntax
debugging rm ipv6 { im | rcom [ ip-prefix prefix-name ] | rr | urt [ ip-prefix prefix-name ] | usr }
undo debugging rm ipv6 { im | rcom | rr | urt | usr }
Default
RM IPv6 route debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
im: Specifies IPv6 routing interface debugging.
rcom: Specifies IPv6 route sending debugging.
ip-prefix prefix-name: References an IPv6 prefix list.
rr: Specifies IPv6 recursive route debugging.
urt: Specifies IPv6 routing table debugging.
usr: Specifies IPv6 unicast static route debugging.
Usage guidelines
Table 66 describes output fields and messages for the debugging rm ipv6 im command.
Table 66 Output from the debugging rm ipv6 im command
Field
Description
IfnetIdx Interface index.
IfState Interface state.
Slot Slot number.
IfName Interface name.
IfType Interface type.
MsgType Message type.
Bandwidth Interface bandwidth.
Baudrate Baud rate.
LogAddr Interface address.
PrefixLen Prefix length.
Table 67 describes output fields and messages for the debugging rm ipv6 rcom command.
Table 67 Output from the debugging rm ipv6 rcom command
Field
Description
Route with Dest Destination prefix of the route.
added to FIB6 Added to the FIB table.
124