HP Comware 5 Debug Manual Vol 1

Field
Description
deleted from FIB6 Deleted from the FIB table.
Table 68 describes output fields and messages for the debugging rm ipv6 urt command.
Table 68 Output from the debugging rm ipv6 urt command
Field
Description
RM Route management.
addition msg Route addition message.
deletion msg Route deletion message.
modification msg Route modification message.
setflag msg Route flag setting message.
resetflag msg Route flag resetting message.
setrelyflag msg Route recursion flag setting message.
resetrelyflag msg Route recursion flag resetting message.
Destination Destination IPv6 address.
RelayNextHop Recursive next hop IPv6 address.
Neighbour Neighbor address.
Examples
# Enable IPv6 route debugging.
<Sysname> debugging rm ipv6 urt
*Aug 30 11:19:39:520 2006 MAIN RM/3/RMDEBUG:
RM receive ipv6 route addition msg , the detail info is
Destination : FE80:: PrefixLength : 10
NextHop : :: Preference : 0
RelayNextHop:: :
Neighbour : :: Protocol : Direct
Interface : NULL0 Flags : 10010
*Aug 30 11:19:40:314 2006 MAIN RM/3/RMDEBUG:
RM receive ipv6 route addition msg , the detail info is
Destination : 123::123 PrefixLength : 128
NextHop : ::1 Preference : 0
RelayNextHop: : :
Neighbour : :: Protocol : Direct
Interface : InLoopBack0 Flags : 10050
*Aug 30 11:19:40:314 2006 MAIN RM/3/RMDEBUG:
RM receive ipv6 route addition msg , the detail info is
Destination : 123:: PrefixLength : 100
NextHop : 123::123 Preference : 0
RelayNextHop: : :
Neighbour : :: Protocol : Direct
Interface : Ethernet1/0 Flags : 10000
125