HP Comware 5 Debug Manual Vol 1

slot slot-number: Specifies debugging for an IRF member device. The slot-number argument specifies the
ID of an IRF member device. (Centralized IRF devices.)
drv: Specifies debugging for distribution to driver.
chassis chassis-number slot slot-number: Specifies debugging for a card on an IRF member device. The
chassis-number argument specifies the ID of the IRF member device. The slot-number argument specifies
the number of the slot that holds the card. (Distributed IRF devices.)
Usage guidelines
This command is supported only on devices with single-core CPUs.
Table 79 describes output fields and messages for the debugging mpls lfib slot drv command.
Table 79 Output from the debugging mpls lfib slot drv command
Field
Description
MFW Forwarding module.
DRV Driver module.
VC Virtual circuit.
ILM Incoming label mapping.
PW Pseudo wire.
del Delete.
FRR Fast reroute.
MFW-DRV
Interaction between the MFW module and the DRV
module.
NHLFE Next hop label forwarding entry.
DrvContext Information returned to the upper layer by the drive.
result is
Operation result:
• 0—Success.
• 1—Failure.
144