HP Comware 5 Debug Manual Vol 1

In VCLabel is 98350
TunnelId is 0xab0003
EncapType is 0
VlanID is 4
DrvContext is 50266404, 4294901764
// The first equal-cost VC entry was deleted.
*Apr 19 15:59:59:888 2008 PE2 MFW/7/MPLSFW PACKET:Slot=3;
MFW-VLL: The content of VLL DelInfo to Drv is:
In IfIndex is 0x190006d
In VCLabel is 98350
TunnelId is 0xab0004
EncapType is 0
VlanID is 4
DrvContext is 0, 0
// The second equal-cost VC entry was deleted.
*Apr 19 16:00:00:178 2008 PE2 MFW/7/MPLSFW PACKET:Slot=3;
MFW-DRV: Modify VLL VC equal entry. TunnelID is 11206660, New Entry count is 1,Old Entry
count is 2, result is 0.
// MPLS informed the driver of the update of equal cost entries. The tunnel ID is 11206660, number of
new entries is 1, and number of old entries is 2. The result (success) that the drive returned is success (0
indicates success, and 1 indicates failure).
# When the link between PE 2 and P 1 is resumed, output similar to the following example is generated:
<PE2> debugging mpls lfib slot 3 drv
*Apr 19 16:00:28:853 2008 PE2 MFW/7/MPLSFW PACKET:Slot=3;
INFO : The content of send entry to Drv is:
AccessType is 0
Transtype is 4
CtrlWord is 0
Mtu is 1500
InIfIndex is 0x190006d
InVcLabel is 98350
OutVCLabel is 98331
RmtVTag is 4
LspTnlId is 11206659
CEType is 0
VlanID is 4
OutIfIndex is 0x1900063
OutAtIndex is 0
SlotNumber is 3
LabelStackDepth is : 1 , label is :1082
TnlNextHop is 20.20.20.2
The outest tunnel is TE tunnel, if name Tunnel3/0/1 (0x1af0000)
The type of bandwidth is 0
The bandwidth is 0
DrvContext is 50266404, 4294901764
// The first equal-cost VC entry was added.
*Apr 19 16:00:29:579 2008 PE2 MFW/7/MPLSFW PACKET:Slot=3;
146