HP Comware 5 Debug Manual Vol 1

INFO : The content of send entry to Drv is:
AccessType is 0
Transtype is 4
CtrlWord is 0
Mtu is 1500
InIfIndex is 0x190006d
InVcLabel is 98350
OutVCLabel is 98331
RmtVTag is 4
LspTnlId is 11206660
CEType is 0
VlanID is 4
OutIfIndex is 0x1900063
OutAtIndex is 0
SlotNumber is 3
LabelStackDepth is : 1 , label is :1083
TnlNextHop is 20.20.20.2
The outest tunnel is TE tunnel, if name Tunnel3/0/2 (0x1af0001)
The type of bandwidth is 0
The bandwidth is 0
DrvContext is 0, 0
// The second equal-cost VC entry was added.
*Apr 19 16:00:30:288 2008 PE2 MFW/7/MPLSFW PACKET:Slot=3;
MFW-VLL: The content of VLL DelInfo to Drv is:
In IfIndex is 0x190006d
In VCLabel is 98350
TunnelId is 0xab0003
EncapType is 0
VlanID is 4
DrvContext is 50266404, 4294901764
// The VC entry was deleted for the path from PE 2 through P 2 to PE 3.
*Apr 19 16:00:30:598 2008 PE2 MFW/7/MPLSFW PACKET:Slot=3;
MFW-DRV: Modify VLL VC equal entry. TunnelID is 11206660, New Entry count is 2,Old Entry
count is 1, result is 0.
// MPLS informed the driver of the update of the VC entries. The tunnel ID is 11206660, number of new
entries is 2, and number of old entries is 1. The result (success) that the drive returned is success (0
indicates success, and 1 indicates failure).
debugging mpls lspc
Use debugging mpls lspc to enable debugging for the LSP control module.
Use undo debugging mpls lspc to disable debugging for the LSP control module.
Syntax
debugging mpls lspc { all | error | event | packet }
undo debugging mpls lspc { all | error | event | packet }
147