HP Comware 5 Debug Manual Vol 1

*May 1 12:29:15:436 2000 Sysname 8021X/7/EVENT:Auth:204,Failed to send
EAPoL-Notification...
// 8 0 2.1 X failed to send notification to the client.
# Enable 802.1X packet debugging. Output similar to the following example is generated when a user
requests authentication under the following conditions:
•
802.1X is enabled on the device.
•
A RADIUS scheme is configured for user authentication.
<Sysname> debugging dot1x packet
*May 1 12:56:27:934 2000 Sysname 8021X/7/PACKET:Port:GigabitEthernet1/1, Received an
EAPOL packet.
*May 1 12:56:27:944 2000 Sysname 8021X/7/PACKET:Port:GigabitEthernet1/1, Packet type:
EAPOL-START.
// GigabitEthernet 1/1 received an EAPOL-Start frame.
*May 1 12:56:27:954 2000 Sysname 8021X/7/PACKET:Port:GigabitEthernet1/1,End processing
the packet received.
---Verbose information of the packet---
Destination Mac Address: ffff-ffff-ffff
Source Mac Address: 0015-e947-e45b
Mac Frame Type: 888e.
Protocol Version ID: 1.
Packet Type: 1.
Packet Length: 0.
// GigabitEthernet 1/1 received an authentication request.
*May 1 12:56:27:970 2000 Sysname 8021X/7/PACKET:Port:GigabitEthernet1/1, Transmitted a
packet.
---Verbose information of the packet---
Destination Mac Address: 0015-e947-e45b
Source Mac Address: 00e0-fc01-5502
Mac Frame Type: 888e.
Protocol Version ID: 1.
Packet Type: 0.
Packet Length: 5.
-----Packet Body-----
Code: 1.
Identifier: 1.
Length: 5.
// GigabitEthernet 1/1 sent an authentication response.
13