HP Comware 5 Debug Manual Vol 1

Ta b l e 81 describes output fields and messages for the debugging mpls management interface
command.
Table 81 Output from the debugging mpls management interface command
Field
Description
Received Signal XX message
LSPM received a message from the signaling module,
such as a signaling DELETE or signaling CREATE
message.
OutIfIndex Outgoing interface index.
InIfIndex Incoming interface index.
Received Route XX message
LSPM received a message from the routing module,
such as a CREATE or DELETE message.
Table 82 describes output fields and messages for the debugging mpls management policy command.
Table 82 Output from the debugging mpls management policy command
Field
Description
Received Route XX message
LSPM received a message from Route module, such as
a route ADD or a route DELETE message.
LSP XX
Performed a specific operation of the LSP, such as
DELETE and ADD.
IfIndex Outgoing interface index.
LSPIndex LSP index.
Route Does not Satisfy Policy!. Sig Prot is informed.
LSPM notified the signaling module because the route
did not satisfy the policy.
Table 83 describes output fields and messages for the debugging mpls management process command.
Table 83 Output from the debugging mpls management process command
Field
Description
OutIfIndex Outgoing interface index.
InIfIndex Incoming interface index.
evt/lsptype X/X Event type and LSP type.
token LSP token.
Table 84 describes output fields and messages for the debugging mpls management tunnel command.
Table 84 Output from the debugging mpls management tunnel command
Field
Description
Begin physic check
LSPM has begun to check the physical interface of the
tunnel.
ulIfIndex: X Physical interface index.
ulTunnelIfIndex Tunnel interface index.
150