Manualshelf

HP Comware 5 Debug Manual Vol 1

ManualsBrandsHP ManualsNetwork HardwareHP HSR68xx Configure-to-Order Router Solution
151152153154155156157158159160
*0.25271860 PE1 LSPM/8/LSPM PROCESS:
Setting MTU = LSP MTU
*0.25271860 PE1 LSPM/8/LSPM PROCESS:
Succeeded in sending forwarding message to MFW.
*0.25271860 PE1 LSPM/8/LSPM PROCESS:
Notify to TNLM SUCCESS. Event: 2, LspIndex: 9267, 0x8c030303/0x20/token557248.
*0.25271860 PE1 LSPM/8/LSPM PROCESS:
Free Token success: 557248
// LSPM freed the token successfully.
#Dec 22 17:05:59:280 2005 PE1 LDP/5/SessionUp: Session(140.2.2.2:0. public Instance)'s
state change to Up
// The session came up again.
*0.25274675 PE1 LSPM/8/LSPM PROCESS:
Alloc Token success: 557249/0x300010
// LSPM allocated a token successfully.
*0.25274675 PE1 LSPM/8/LSPM PROCESS:
Rcv create lsp msg from signaling protocol 0x8c020202/0xffffffff In If - 0x0 !
// LSPM received a create LSP message from the signaling protocol.
*0.25274690 PE1 LSPM/8/LSPM PROCESS:
Received Signaling message.
*0.25274690 PE1 LSPM/8/LSPM PROCESS:
Received Signal CREATE message, VRF Index: 0 destination: 0x8c020202 destination mask:
0xffffffff Nexthop: 0x8c0c0102 OutIfIndex: 0x300010 InIfIndex: 0x0
*0.25274690 PE1 LSPM/8/LSPM PROCESS:
Setting MTU = LSP MTU
*0.25274690 PE1 LSPM/8/LSPM PROCESS:
Add route success, VRF:0 Destination: 0x8c020202 Destination mask: 0xffffffff Nexthop:
0x8c0c0102 IfIndex:0x300010 .
// LSPM added a route successfully.
*0.25274690 PE1 LSPM/8/LSPM PROCESS:
Added LSP in LM Successfully
// LSPM added an LSP successfully.
*0.25274690 PE1 LSPM/8/LSPM PROCESS:
Succeeded in sending forwarding message to MFW.
// LSPM sent the forwarding message to MFW successfully.
*0.25274690 PE1 LSPM/8/LSPM PROCESS:
Notify to TNLM SUCCESS. Event: 1, LspIndex: 9268, 0x8c020202/0x20/token557249.
// LSPM notified the TNLM.
*0.25275573 PE1 LSPM/8/LSPM PROCESS:
Received Route message.
*0.25275573 PE1 LSPM/8/LSPM PROCESS:
Add route success, VRF:0 Destination: 0x8c010101 Destination mask: 0xffffffff Nexthop:
0x7f000001 IfIndex:0x150000 .
*0.25275573 PE1 LSPM/8/LSPM PROCESS:
Rcv create lsp msg from signaling protocol 0x8c010101/0xffffffff In If -
0x300010 !
*0.25275812 PE1 LSPM/8/LSPM PROCESS:
154