HP Comware 5 Debug Manual Vol 1

debugging mpls packet
Use debugging mpls packet to enable debugging for MPLS packet forwarding.
Use undo debugging mpls packet to disable debugging for MPLS packet forwarding.
Syntax
debugging mpls packet [ acl acl-number ] [ error ] [ inlabel outer-in-label [ inner-in-label ] ]
[ l2vpn-in-interface interface-type interface-number ]
undo debugging mpls packet
Default
Debugging for MPLS packet forwarding is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
acl: Specifies debugging for MPLS packets that match the specified ACL.
acl-number: Specifies an advanced ACL by its number in the range of 3000 to 3999.
error: Specifies debugging for MPLS error packets.
inlabel: Specifies debugging for MPLS packets with the specified incoming label.
outer-in-label: Specifies the outer incoming label in the range of 0 to 1048576.
inner-in-label: Specifies the inner incoming label in the range of 16 to 1048576.
l2vpn-in-interface: Specifies debugging for MPLS packets that are bound to an L2VPN interface.
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
Table 85 describes output fields and messages for the debugging mpls packet command on single-core
devices.
Table 85 Output from the debugging mpls packet command (on single-core devices)
Field
Description
MPLSFW_Input MFW received MPLS packets.
L2VPNForward Function for processing.
PKTTYPE_MPLS The packet type is MPLS.
Label(s)
Labels, including the inner label (private network) and
outer label (public network).
PktLen Packet length.
Table 86 describes output fields and messages for the debugging mpls packet command on multi-core
devices.
156