HP Comware 5 Debug Manual Vol 1

AAA debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging aaa
Use debugging aaa to enable AAA debugging.
Use undo debugging aaa to disable AAA debugging.
Syntax
debugging aaa { all | error | event } service-type { ssl-vpn | super | wapi }
undo debugging aaa { all | error | event } service-type wapi { ssl-vpn | super | wapi }
Default
AAA debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of debugging for AAA.
error: Specifies debugging for errors.
event: Specifies debugging for events.
service-type: Specifies debugging for the specified user service type.
ssl-vpn: Specifies the service type of SSL VPN.
super: Specifies the service type of user privilege level switching.
wapi: Specifies the service type of WAPI.
Usage guidelines
Table 5 describes output fields and messages for the debugging aaa error command.
Table 5 Output from the debugging aaa error command
Field
Description
Failed to refresh RLT timer Failed to refresh real-time accounting timer.
Authen-req: Authentication request.
Authen-resp: Authentication response.
Continue-req: Continue request.
Author-req: Authorization request.
14