HP Comware 5 Debug Manual Vol 1

*0.6557156 Sysname BFD/8/SCM: Chassis=1-Slot=1;The bfd-int of the session doesn't exist,
create bfd-if
*0.6557156 Sysname BFD/8/SCM: Chassis=1-Slot=1;Bfd-int[Ethernet1/1], Oper: create
*0.6557156 Sysname BFD/8/SCM: Chassis=1-Slot=1;Create session entry
*0.6557156 Sysname BFD/8/SCM: Chassis=1-Slot=1;Add session to bfd interface
*0.6557156 Sysname BFD/8/SCM: Chassis=1-Slot=1;Add session to IP hash table
// The interface card (Slot 1) created the session.
*0.6557156 Sysname BFD/8/TMR: Chassis=1-Slot=1;Create send-pkt timer
*0.6557156 Sysname BFD/8/TMR: Chassis=1-Slot=1;Send-pkt timer[100ms] of sess[192.168.1
2.11/192.168.12.10,Eth1/1] is created
*0.6557156 Sysname BFD/8/TMR: Chassis=1-Slot=1;Create detect-timer
*0.6557172 Sysname BFD/8/TMR: Chassis=1-Slot=1;Detect-timer[600ms] of Sess[192.168.12.
11/192.168.12.10,Eth1/1] is created
// The interface (Slot 1) created a send timer and detect timer.
*0.6557250 Sysname BFD/8/PKT_RCV: Chassis=1-Slot=1;Src:192.168.12.10, Dst:
192.168.12.11,Ver:1,Diag:0,Sta:3,P/F/C/A/D/R:0/0/1/0/0/0,multi:6,LD/RD:4/2,Tx:100ms,R
x:100ms
// The interface card (Slot 1) received an up message and started to maintain the session.
debugging bfd drv
Use debugging bfd drv to enable BFD driver debugging.
Use undo debugging bfd drv to disable BFD driver debugging.
Syntax
debugging bfd drv
undo debugging bfd drv
Default
BFD driver debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 88 describes output fields and messages for the debugging bfd drv command.
Table 88 Output from the debugging bfd drv command
Field
Description
Gen DPMBuf failed for BFD VCPU,sess (session index)
The control VCPU failed to generate MBuf packets for
the BFD virtual CPU (VCPU).
Switch MsgType failed for BFD VCPU,sess (session
index),opertype (opertype),chgattr (chgattr)
The control VCPU failed to switch message type for the
BFD VCPU.
Send Msg to BFD VCPU,msgtype (msgtype),sess
(session index)
Sending messages to the BFD VCPU.
162