HP Comware 5 Debug Manual Vol 1

Field
Description
Author-resp: Authorization response.
Acct-start-req: Accounting-start request.
Acct-stop-resp: Accounting-stop response.
Acct-RLT-req: Real-time accounting request.
Acct-RLT-res: Real-time accounting response.
Table 6 describes output fields and messages for the debugging aaa event command.
Table 6 Output from the debugging aaa event command
Field
Description
Cut: Send message to access. AAA sent a cut response to the access module.
Authen-req: Authentication request.
Authen-resp: Authentication response.
Continue-req Continue request.
Continue-resp: Continue response.
Author-req: Authorization request.
Author-resp: Authorization response.
Acct-start-req: Accounting-start request.
Acct-start-resp: Accounting-start response.
Acct-stop-Req Accounting-stop request.
Acct-stop-resp Accounting-stop response.
Acct-RLT-req Real-time accounting request.
RLT-Res Real-time accounting response.
Release-Req Release request.
Examples
The output in the following examples was created when a WAPI client initiated an authentication request
under the following conditions:
•
On the wireless AC, a RADIUS scheme is configured for WAPI access.
•
IMC is used as the authentication server. It has the same CA-assigned certificate as the certificate
on the WAPI client.
# On the wireless AC, enable AAA event debugging.
<Sysname> debugging aaa event service-type wapi
*Apr 26 12:05:36:652 2000 Sysname AAA/7/Event:UserID=0xffffffff,Service-type=0x600
0 Authen-req (AccessHandle = 0, AccessID = 0)
// AAA received an authentication request from the access module.
*Apr 26 12:05:36:662 2000 Sysname AAA/7/Event:
[AAA_UserName , 1, wapi]
[AAA_DomainName , 63, wapi]
[AAA_Service , 4, 2]
15