HP Comware 5 Debug Manual Vol 1

Default
BFD IPC event debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
This command applies only to distributed devices.
Tab l e 91 describes output fields and messages for the debugging bfd ipc command.
Table 91 Output from the debugging bfd ipc command
Field
Description
[SND] Sess (session information), MAIN->IO, Mode:
Unicast. Oper: Append Session, Dst chassis/slot:
chassis-id/slot-id
BFD sent the IPC message (append session) to the
interface card (or standby card) in unicast.
[SND] Sess (session information), MAIN->IO, Mode:
Multicast, Oper: Append Session
BFD sent the IPC message (append session) to all the
interface cards (or standby cards) in multicast.
[SND] Sess(session information), MAIN->IO, Mode:
Unicast, Oper: Delete Session, Dst chassis/slot:
chassis-id/slot-id
BFD sent the IPC message (delete session) to the
interface card (or standby card) in unicast.
[SND] Sess (session information), MAIN->IO, Mode:
Multicast, Oper: Delete Session
BFD sent the IPC message (delete session) to all the
interface cards (or standby cards) in multicast.
[SND] Sess (session information), MAIN->IO, Mode:
Unicast, Oper: Append App, Dst chassis/slot:
chassis-id/slot-id
BFD sent the IPC message (append application) to the
interface card (or standby card) in unicast.
[SND] Sess (session information), MAIN->IO, Mode:
Multicast, Oper: Append App
BFD sent the IPC message (append application) to all
the interface cards (or standby cards) in multicast.
[SND] Sess (session information), MAIN->IO, Mode:
Unicast, Oper: Delete App, Dst chassis/slot:
chassis-id/slot-id
BFD sent the IPC message (delete application) to the
interface card (or standby card) in unicast.
[SND] Sess (session information), MAIN->IO, Mode:
Multicast, Oper: Delete App
BFD sent the IPC message (delete application) to all
the interface cards (or standby cards) in multicast.
[SND] Interface [interface name] MAIN->IO, Mode:
Multicast, Oper: Delete Interface
BFD sent the IPC message (delete interface) to all the
interface cards (or standby cards) in multicast.
[SND] MAIN->IO, Mode: Multicast, Oper: Is Sess
Exist, IsExist: (flag of session exist)
BFD sent the session exist flag message to all the
interface cards (or standby cards) in multicast.
[SND] MAIN->IO, Mode: Unicast, Oper: Is Sess Exist,
IsExist: (flag of session exist)
BFD sent the session exist flag message to the newly
inserted interface card (or standby card) in unicast.
[SND] MAIN->IO, Mode: Multicast, Oper: HA Notify BFD notified the HA session message to all the cards.
[SND] Interface[interface name], MAIN->IO, Mode:
Multicast, Oper: Synchronize TX
BFD synchronized the configured minimum transmit
interval to all the cards.
[SND] Interface[interface name], MAIN->IO, Mode:
Multicast, Oper: Synchronize RX
BFD synchronized the configured minimum transmit
interval information to all the cards.
170