HP Comware 5 Debug Manual Vol 1

Field
Description
[SND] Interface[interface name], MAIN->IO, Mode:
Multicast, Oper: Synchronize Detecting Multiplier
BFD synchronized the configured detecting multiplier
to all the cards.
[SND] Interface[interface name], MAIN->IO, Mode:
Multicast, Oper: Synchronize Auth Info
BFD synchronized the configured authentication
information to all the cards.
[SND] MAIN->IO, Mode: Multicast, Oper:
Synchronize Debugging Switch(debugging flag)
BFD synchronized the debugging switch information
to all the cards.
[SND] MAIN->IO, Mode: Unicast, Oper: Synchronize
Debugging Switch (debugging flag), Dst chassis/slot:
chassis-id/slot-id
BFD synchronized the debugging switch information
to the newly inserted card.
[SND] MAIN->IO, Mode: Multicast, Oper:
Synchronize Trap Flag, Flag: (trap switch flag)
BFD synchronized the trap flag information to all the
cards.
[SND] MAIN->IO, Mode: Unicast, Oper: Synchronize
Trap Flag, Flag: (trap switch flag), Dst chassis/slot:
chassis-id/slot-id
BFD synchronized the trap flag information to the
newly inserted cards.
[SND] MAIN->IO, Mode: Multicast, Oper: Reset All
Stats Info
BFD reset session statistics information on all the
cards.
[SND] MAIN->IO, Mode: Unicast, Oper: Reset Stats
Info, Dst chassis/slot: chassis-id/slot-id
BFD reset session statistics information on the
specified card.
[SND] MAIN->IO, Mode: Multicast, Oper: Download
Interface
BFD synchronized interface structure to all cards
periodically.
[SND] MAIN->IO, Mode: Unicast, Oper: Download
Session, Dst chassis/slot: chassis-id/slot-id
BFD synchronized session structure to the specified
card periodically.
[SND] MAIN->IO, Mode: Multicast, Oper: Download
Session
BFD synchronized session structure to all cards
periodically.
[SND] MAIN->IO, Mode: Multicast, Oper:
Synchronize IO Aging Timer Interval
BFD synchronized the interface card aging timer
interval to all cards, including standby cards.
[SND] Sess (session information), IO->MAIN, Mode:
Unicast, Oper: Session Update, Dst chassis/slot:
chassis-id/slot-id
BFD sent the update message to the active MPU.
[RCV] Sess (session information), Oper: Append
Session, Src chassis/slot: chassis-id/slot-id
BFD received an Append Session message.
Examples
# Enable IPC event debugging on a BFD-capable distributed device. When you configure BFD
parameters on an interface, output similar to the following example is generated:
<Sysname> debugging bfd ipc
<Sysname> system-view
[Sysname] interface ethernet 7/1/0
[Sysname-Ethernet7/1/0] bfd min-receive-interval 500
*Dec 31 16:32:58:272 2006 Sysname BFD/7/IPC:[SND] Interface[Ethernet7/1/0], MAIN->IO,
Mode: Multicast, Oper: Synchronize RX
*Dec 31 16:32:58:272 2006 Sysname BFD/7/IPC: Chassis=1-Slot=0;[RCV] Oper: Cfg change
min-rx, Src chassis/slot: 1/7
// The parameter configuration was synchronized to other cards.
%Dec 31 16:31:02:304 2006 Sysname DEV/4/BOARD STATE NORMAL:
171