HP Comware 5 Debug Manual Vol 1

Table 93 Output from the debugging bgp command
Field
Description
Recv Received packets.
Send Sent packets.
Length: LengthNumber Packet length.
Table 94 describes output fields and messages for the debugging bgp open command.
Table 94 Output from the debugging bgp open command
Field
Description
Version: X BGP protocol version.
Local AS: X Local AS number.
OPT Type: 2 (Capability) Capability negotiation.
CAP Type: 1 (Multiprotocol) CAP Len: 4 Multiprotocol capability: afi: 1; safi: 1.
IPv4-UNC (1/1)
CAP Type: 2 (RouteRefresh) CAP Len: 0
Capable of route-refresh.
CAP Type: 3 (RouteFilter) CAP Len: 7
Capable of filtering outbound routes. The capability
field length is 7.
Type: 64 (both)
Type: 64 refers to the type value of the ORF capability;
both refers to the ORF sending (send) and receiving
(receive) capabilities.
Total CAPB Len : X Total capability length.
Total OPT Len : X Total optional parameter length.
Table 95 describes output fields and messages for the debugging bgp refresh command.
Table 95 Output from the debugging bgp refresh command
Field
Description
AFI: 1; SAFI: 1
• Address family: 1.
• Sub-address family: 1.
AFI/ SAFI Address family/sub-address family.
WTR
(When to Refresh) Wait delay for sending refresh
messages.
ORF Type Type value of the ORF capability.
Length of ORFs Total length of the ORF entries.
Action Action field of the ORF entry.
Match Match field of the ORF entry.
For more information about Update message debugging information, see the following section.
177